Envío Gratis Pedidos Superiores $25

K&N Marine Flame Arrestors & Accessories Boat Applications

K&N Marine Flame Arrestor 59-1195

K&N Flame Arrestors for Boats

  • Marine approved per SAE J1928 standard
  • Designed to increase horsepower & torque
  • Washable and reusable air filter

Due to the differences in engine compartment designs, and accessories supplied by those manufactures, clearances may vary from boat to boat. The applications listed are to be used as a reference guide only. Make sure to double check all the measurements before ordering by using the checklist below. If you wish to increase or decrease the size of the filter, see Universal 3-Piece assemblies below. (K&N Marine Flame Arrestor 59-1195 shown in picture)


IMPORTANT: DID YOU CHECK THE FOLLOWING?

  1. Diameter clearance around the existing flame arrestor. Can the flame arrestor diameter be increased?
  2. Height restriction, due to hatch clearance or any other obstruction. Can the flame arrestor’s height be increased?
  3. Do any vent lines connected to existing flame arrestor. If there are vent lines attached, measure inside diameter of vent line and order appropriate vent hose kit below.
  4. For multiple carburetor application, check center to center measurements ensuring enough space for two flame arrestors.
  5. Check diameter of carburetor.

K&N Marine Flame Arrestors for Indmar Boats

Indmar 5.7L Malibu Vortec 4 bbl 5.7L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
3.75"2"59-32641

Indmar 5.7l Vortec Carb 4 bbl 5.7L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
3.75"2"59-32641

Indmar 5.7L Vortec TBI 5.7L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
3.75"2"59-32641,3

Indmar 7.4L 4 bbl 7.4L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
3.75"2"59-32641

Indmar 7.4L MPI 7.4L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
N/AN/A59-5020

Indmar 8.1L 4 bbl 8.1L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2

Indmar 8.1L PFI 8.1L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
N/AN/A59-5020

K&N Marine Flame Arrestors for Mercury Boats

Mercury 3.0L 2 bbl 3.0L L4

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.1253.75"2"59-32641
3.0633.75"2"59-32621
3.0633.75"2.875"59-33621

Mercury 4.3L 2 bbl 4.3L V6

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"3.75"2"59-32641
3.063"3.75"2"59-32621
3.063"3.75"2.875"59-33621

Mercury 4.3LH 4 bbl 4.3L V6

Total HeightElement HeightK&N Flame ArrestorFootnotes
3.75"2"59-32641

Mercury 4.3L EFI TBI 4.3L V6

Total HeightElement HeightK&N Flame ArrestorFootnotes
3.75"2"59-32641,3

Mercury 5.0L 2 bbl 5.0L V8

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"4.50"2.75"59-33641,2
3.063"4.50"2"59-32621,2
3.063"4.50"2.875"59-33621,2

Mercury 5.0L EFI TBI 5.0L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Mercury 5.7L 2 bbl 5.7L V8

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"4.50"2.75"59-33641,2
3.063"3.75"2"59-32621,2
3.063"4.50"2.875"59-33621,2

Mercury 5.7L SKI 2 bbl 5.7L V8

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"4.50"2.75"59-33641,2
3.063"3.75"2"59-32621,2
3.063"4.50"2.875"59-33621,2

Mercury 5.7L EFI TBI 5.7L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

1998, 1999 & 2000 Mercury Mercruiser 7.4L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
6.625"6"59-5004

Mercury Early Mercruiser MPI 3V Pulley 454 MAG

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.375"4"59-45415

Mercury Early Mercruiser MPI 3V Pulley 502 MAG

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.375"4"59-45415

Mercury Late MPI Serpentine Belt 454 MAG

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.375"4"59-45426

Mercury Late MPI Serpentine Belt 502 MAG

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.375"4"59-45426

Mercury 496 MPI 8.1L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.375"4"59-5005

Mercury 496 HO & Mag MPI 8.1L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.375"4"59-5005

Mercury HP 500 4 bbl 8.2L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
6.75"5"59-33701,2

Mercury HP 500 MPI 8.2L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.375"4"59-5020

K&N Marine Flame Arrestors for Volvo Penta SX Series Boats

Volvo Penta SX 3.0 GS 2 bbl 3.0L L4

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"3.75"2"59-32641
3.063"3.75"2"59-32621
3.063"3.75"2.875"59-33621

Volvo Penta SX 4.3GL 2 bbl 4.3L V6

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"3.75"2"59-32641
3.063"3.75"2"59-32621
3.063"3.75"2.875"59-33621

Volvo Penta SX 4.3L Gi EFI-TBI 4.3L V6

Total HeightElement HeightK&N Flame ArrestorFootnotes
3.75"2"59-32641,3

Volvo Penta SX 5.0GL 2 bbl 5.0L V8

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"4.50"2.75"59-33641,2
3.063"4.50"2"59-32621,2
3.063"4.50"2.875"59-33621,2

Volvo Penta SX 5.0L Gi EFI-TBI 5.0L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Volvo Penta SX 5.7 GS 2 bbl 5.7L V8

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"4.50"2.75"59-33641,2
3.063"4.50"2"59-32621,2
3.063"4.50"2.875"59-33621,2

Volvo Penta SX 5.7L Gsi EFI-TBI 5.7L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Volvo Penta SX 7.4 Gi MPI 7.4L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

K&N Marine Flame Arrestors for Volvo Penta Duoprop Series Boats

Volvo Penta Duoprop 4.3GL 2 bbl 4.3L V6

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"3.75"2"59-32641
3.063"3.75"2"59-32621
3.063"3.75"2.875"59-33621

Volvo Penta Duoprop 4.3L Gi EFI-TBI 4.3L V6

Total HeightElement HeightK&N Flame ArrestorFootnotes
3.75"2"59-32641,4

Volvo Penta Duoprop 5.0GL 2 bbl 5.0L V8

FlangeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.125"4.50"2.75"59-33641,2
3.063"3.75"2"59-32621,2
3.063"4.50"2.875"59-33621,2

Volvo Penta Duoprop 5.0L Gi EFI-TBI 5.0L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Volvo Penta Duoprop 5.7 GS 2 bbl 5.7L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2

Volvo Penta Duoprop 5.7L Gsi EFI-TBI 5.7L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Volvo Penta Duoprop 7.4 Gi EFI-MPI 7.4L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Volvo Penta Duoprop 7.4 Gsi EFI-MPI 7.4L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Volvo Penta Duoprop 8.1L MPI EFI-MPI 8.1L V8

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

K&N Marine Flame Arrestors for Volvo Penta High-End Series Boats

Volvo Penta DPX 385 EFI-MPI 7.4L/454

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Volvo Penta DPX 415 EFI-MPI 8.2L/502

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Volvo Penta DPX 500 EFI-MPI 8.2L/502

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Volvo Penta DPX 600 EFI-MPI 8.8L/540

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

K&N Marine Flame Arrestor for Volvo Penta Inboard 7.4Gi EFI-MPI 7.4L/454 Boats

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Flame Arrestor for Volvo Penta Platinum 7.4Gi EFI-MPI 7.4L/454 Boats

Total HeightElement HeightK&N Flame ArrestorFootnotes
4.50"2.75"59-33641,2,4

Footnotes for above applications: 1) May increase size as needed. 2) May decrease size as needed. 5) Kit includes adapter Part# 85-8837 and flame arrestor Part# 59-5005. 6) Kit includes adapter Part# 85-8837 and flame arrestor Part# 59-5006. 7) Single Stud, 3-7/8" throttle body 8) 3 Studs, 3-5/8" throttle body.


Oval Four Bolt Flame Arrestor Adapter for Mercruiser MPI

K&N Flame Arrestor Adapter 85-8837

This oval, four bolt flame arrestor adapter is used for early model Mercruiser MPI with a 3V Pulley and late model MPI with a serpentine belt.


Universal 14 Inch 3-Piece Air Filter Assembly

Flange DiameterElement HeightTotal HeightVelocity StackK&N Flame Arrestor
5-1/8"2.25"3.87"No59-3214
5-1/8"3.0"4.62"No59-3314
5-1/8"4.0"5.62"No59-3414

Universal 9 Inch 3-Piece Air Filter Assembly

Flange DiameterElement HeightTotal HeightVelocity StackK&N Flame Arrestor
5-1/8"2.75"4.5"No59-3364
5-1/8”2.0"3.75"No59-3264
5-1/8"5.0"6.75"No59-3370
5-1/8"2.75"8.5"Yes59-1195
5-1/8"5.0"10.75"Yes59-1196
4-7/32"2.75"4.5"No59-3368
3-1/16"2.0"3.75"No59-3262
3-1/16"2.75"4.5"No59-3362
2-5/8"2.75"4.5"No59-3360
7-5/16”5.0"10.75"Yes59-1198
7-5/16"2.75"4.5"No59-0284
7-5/16"2.75"8.5"Yes59-3366
7-5/16”5.0"6.75"No59-1197

 

K&N Flame Arrestor 59-5004 for 98-00 Mercruiser 7.4L
K&N Flame Arrestor 59-5004 for 98-00 Mercruiser 7.4L

K&N Flame Arrestor 59-3364 for Carb Applications
K&N Flame Arrestor 59-3364 for Carb Applications

K&N Flame Arrestor 59-5005 for Mercruiser 496 HO
K&N Flame Arrestor 59-5005 for Mercruiser 496 HO

K&N Flame Arrestor 59-5020 for Mercruiser HP 500
K&N Flame Arrestor 59-5020 for Mercruiser HP 500

K&N Flame Arrestor Vent Hose Adapter for 3 Piece Assembly
K&N Flame Arrestor Vent Hose Adapter for 3 Piece Assembly

K&N Flame Arrestor 59-4541 for Mercruiser 454/502 Magnum
K&N Flame Arrestor 59-4541 for Mercruiser 454/502 Magnum


Marine Vent Hose Adapters (Trimming for correct height may be required)

Vent Hose SizeAir Filter HeightVent Adapter
1/4"2.75"85-1325
1/4"4"85-1425
1/4"6"85-1625
3/8"2.75"85-1337
3/8"4"85-1437
3/8"6"85-1637
1/2"2.75"85-1350
1/2"4"85-1450
1/2"6"85-1650
5/8"2.75"85-1362
5/8"4"85-1462
5/8"6"85-1662
3/4"2.75"85-1375
3/4"4"85-1475
3/4"6"85-1675

K&N Clamp-On Marine Flame Arrestors

K&N Oval Clamp-On Marine Flame Arrestors

2.93" x 4.75" Flange

LengthWidthHeightNotesK&N Flame Arrestor
6.5"4.75"5.62"GM TPI59-5000
8.62"4.5"3.18"GM LT-1 No Vent59-5020
8.62"4.5"3.18"GM LT 5/8" Vents(2)59-5021
8.62"4.5"3.18"GM LT-1 5/8" Vent59-5019
8.62"5.25"5.5"GM 454 TPI59-5050

3.44" x 5.44" Flange

LengthWidthHeightK&N Flame Arrestor
8.5"5.06"5"59-5007

K&N Round Clamp-On Marine Flame Arrestors

3.75" Flange

LengthWidthHeightNotesK&N Flame Arrestor
9.5" x 4.625" B8.5" x 3.75" T4"454/502 MAG59-5005
9.5" x 4.625" B8.5" x 3.75" T4"454/502 MAG 1/2" Vent59-5006

5" Flange

LengthWidthHeightNotesK&N Flame Arrestor
5"4.5" x 3.25"5"59-5003

3.625" Flange

LengthWidthHeightNotesK&N Flame Arrestor
5.75"3"6"59-5004
5.75"3"6"96-97 GM 2) 3/4" Vents59-5001

3.75" Flange

LengthWidthHeightNotesK&N Flame Arrestor
9.31"4.5"3"96-97 GM (2) 5/8" Vents59-5022
9.31"4.5"3"96-97 GM (2) 3/4" Vents59-5023
9.31"4.5"3"96-97 GM59-5030
9.314.5"3"96-97 GM 5/8" Vent59-5010
5.25"3"6"59-2030

4" Flange

LengthWidthHeightNotesK&N Flame Arrestor
5.38"4.5 x 3.25"5"59-5002